Admin Control Panel v2.0

✎ Editing: perllol.pod ← Back

=head1 NAME

perllol - Manipulating Arrays of Arrays in Perl

=head1 DESCRIPTION

=head2 Declaration and Access of Arrays of Arrays

The simplest two-level data structure to build in Perl is an array of
arrays, sometimes casually called a list of lists.  It's reasonably easy to
understand, and almost everything that applies here will also be applicable
later on with the fancier data structures.

An array of an array is just a regular old array @AoA that you can
get at with two subscripts, like C<$AoA[3][2]>.  Here's a declaration
of the array:

use 5.010;  # so we can use say()

# assign to our array, an array of array references
    @AoA = (
	   [ "fred", "barney", "pebbles", "bambam", "dino", ],
	   [ "george", "jane", "elroy", "judy", ],
	   [ "homer", "bart", "marge", "maggie", ],
    );
    say $AoA[2][1];
  bart

Now you should be very careful that the outer bracket type
is a round one, that is, a parenthesis.  That's because you're assigning to
an @array, so you need parentheses.  If you wanted there I<not> to be an @AoA,
but rather just a reference to it, you could do something more like this:

# assign a reference to array of array references
    $ref_to_AoA = [
	[ "fred", "barney", "pebbles", "bambam", "dino", ],
	[ "george", "jane", "elroy", "judy", ],
	[ "homer", "bart", "marge", "maggie", ],
    ];
    say $ref_to_AoA->[2][1];
  bart

Notice that the outer bracket type has changed, and so our access syntax
has also changed.  That's because unlike C, in perl you can't freely
interchange arrays and references thereto.  $ref_to_AoA is a reference to an
array, whereas @AoA is an array proper.  Likewise, C<$AoA[2]> is not an
array, but an array ref.  So how come you can write these:

$AoA[2][2]
    $ref_to_AoA->[2][2]

instead of having to write these:

$AoA[2]->[2]
    $ref_to_AoA->[2]->[2]

Well, that's because the rule is that on adjacent brackets only (whether
square or curly), you are free to omit the pointer dereferencing arrow.
But you cannot do so for the very first one if it's a scalar containing
a reference, which means that $ref_to_AoA always needs it.

=head2 Growing Your Own

That's all well and good for declaration of a fixed data structure,
but what if you wanted to add new elements on the fly, or build
it up entirely from scratch?

First, let's look at reading it in from a file.  This is something like
adding a row at a time.  We'll assume that there's a flat file in which
each line is a row and each word an element.  If you're trying to develop an
@AoA array containing all these, here's the right way to do that:

while (<>) {
	@tmp = split;
	push @AoA, [ @tmp ];
    }

You might also have loaded that from a function:

for $i ( 1 .. 10 ) {
	$AoA[$i] = [ somefunc($i) ];
    }

Or you might have had a temporary variable sitting around with the
array in it.

for $i ( 1 .. 10 ) {
	@tmp = somefunc($i);
	$AoA[$i] = [ @tmp ];
    }

It's important you make sure to use the C<[ ]> array reference
constructor.  That's because this wouldn't work:

$AoA[$i] = @tmp;   # WRONG!

The reason that doesn't do what you want is because assigning a
named array like that to a scalar is taking an array in scalar
context, which means just counts the number of elements in @tmp.

If you are running under C<use strict> (and if you aren't, why in
the world aren't you?), you'll have to add some declarations to
make it happy:

use strict;
    my(@AoA, @tmp);
    while (<>) {
	@tmp = split;
	push @AoA, [ @tmp ];
    }

Of course, you don't need the temporary array to have a name at all:

while (<>) {
	push @AoA, [ split ];
    }

You also don't have to use push().  You could just make a direct assignment
if you knew where you wanted to put it:

my (@AoA, $i, $line);
    for $i ( 0 .. 10 ) {
	$line = <>;
	$AoA[$i] = [ split " ", $line ];
    }

or even just

my (@AoA, $i);
    for $i ( 0 .. 10 ) {
	$AoA[$i] = [ split " ", <> ];
    }

You should in general be leery of using functions that could
potentially return lists in scalar context without explicitly stating
such.  This would be clearer to the casual reader:

my (@AoA, $i);
    for $i ( 0 .. 10 ) {
	$AoA[$i] = [ split " ", scalar(<>) ];
    }

If you wanted to have a $ref_to_AoA variable as a reference to an array,
you'd have to do something like this:

while (<>) {
	push @$ref_to_AoA, [ split ];
    }

Now you can add new rows.  What about adding new columns?  If you're
dealing with just matrices, it's often easiest to use simple assignment:

for $x (1 .. 10) {
	for $y (1 .. 10) {
	    $AoA[$x][$y] = func($x, $y);
	}
    }

for $x ( 3, 7, 9 ) {
	$AoA[$x][20] += func2($x);
    }

It doesn't matter whether those elements are already
there or not: it'll gladly create them for you, setting
intervening elements to C<undef> as need be.

If you wanted just to append to a row, you'd have
to do something a bit funnier looking:

# add new columns to an existing row
    push @{ $AoA[0] }, "wilma", "betty";   # explicit deref

Prior to Perl 5.14, this wouldn't even compile:

push $AoA[0], "wilma", "betty";        # implicit deref

How come?  Because once upon a time, the argument to push() had to be a
real array, not just a reference to one. That's no longer true.  In fact,
the line marked "implicit deref" above works just fine--in this
instance--to do what the one that says explicit deref did.

The reason I said "in this instance" is because that I<only> works
because C<$AoA[0]> already held an array reference.  If you try that on an
undefined variable, you'll take an exception.  That's because the implicit
derefererence will never autovivify an undefined variable the way C<@{ }>
always will:

my $aref = undef;
    push $aref,  qw(some more values);  # WRONG!
    push @$aref, qw(a few more);        # ok

If you want to take advantage of this new implicit dereferencing behavior,
go right ahead: it makes code easier on the eye and wrist.  Just understand
that older releases will choke on it during compilation.  Whenever you make
use of something that works only in some given release of Perl and later,
but not earlier, you should place a prominent

use v5.14;   # needed for implicit deref of array refs by array ops

directive at the top of the file that needs it.  That way when somebody
tries to run the new code under an old perl, rather than getting an error like

Type of arg 1 to push must be array (not array element) at /tmp/a line 8, near ""betty";"
    Execution of /tmp/a aborted due to compilation errors.

they'll be politely informed that

Perl v5.14.0 required--this is only v5.12.3, stopped at /tmp/a line 1.
    BEGIN failed--compilation aborted at /tmp/a line 1.

=head2 Access and Printing

Now it's time to print your data structure out.  How
are you going to do that?  Well, if you want only one
of the elements, it's trivial:

print $AoA[0][0];

If you want to print the whole thing, though, you can't
say

print @AoA;		# WRONG

because you'll get just references listed, and perl will never
automatically dereference things for you.  Instead, you have to
roll yourself a loop or two.  This prints the whole structure,
using the shell-style for() construct to loop across the outer
set of subscripts.

for $aref ( @AoA ) {
	say "\t [ @$aref ],";
    }

If you wanted to keep track of subscripts, you might do this:

for $i ( 0 .. $#AoA ) {
	say "\t elt $i is [ @{$AoA[$i]} ],";
    }

or maybe even this.  Notice the inner loop.

for $i ( 0 .. $#AoA ) {
	for $j ( 0 .. $#{$AoA[$i]} ) {
	    say "elt $i $j is $AoA[$i][$j]";
	}
    }

As you can see, it's getting a bit complicated.  That's why
sometimes is easier to take a temporary on your way through:

for $i ( 0 .. $#AoA ) {
	$aref = $AoA[$i];
	for $j ( 0 .. $#{$aref} ) {
	    say "elt $i $j is $AoA[$i][$j]";
	}
    }

Hmm... that's still a bit ugly.  How about this:

for $i ( 0 .. $#AoA ) {
	$aref = $AoA[$i];
	$n = @$aref - 1;
	for $j ( 0 .. $n ) {
	    say "elt $i $j is $AoA[$i][$j]";
	}
    }

When you get tired of writing a custom print for your data structures,
you might look at the standard L<Dumpvalue> or L<Data::Dumper> modules.
The former is what the Perl debugger uses, while the latter generates
parsable Perl code.  For example:

use v5.14;     # using the + prototype, new to v5.14

sub show(+) {
	require Dumpvalue;
	state $prettily = new Dumpvalue::
			    tick        => q("),
			    compactDump => 1,  # comment these two lines out
			    veryCompact => 1,  # if you want a bigger dump
			;
	dumpValue $prettily @_;
    }

# Assign a list of array references to an array.
    my @AoA = (
	   [ "fred", "barney" ],
	   [ "george", "jane", "elroy" ],
	   [ "homer", "marge", "bart" ],
    );
    push $AoA[0], "wilma", "betty";
    show @AoA;

will print out:

0  0..3  "fred" "barney" "wilma" "betty"
    1  0..2  "george" "jane" "elroy"
    2  0..2  "homer" "marge" "bart"

Whereas if you comment out the two lines I said you might wish to,
then it shows it to you this way instead:

0  ARRAY(0x8031d0)
       0  "fred"
       1  "barney"
       2  "wilma"
       3  "betty"
    1  ARRAY(0x803d40)
       0  "george"
       1  "jane"
       2  "elroy"
    2  ARRAY(0x803e10)
       0  "homer"
       1  "marge"
       2  "bart"

=head2 Slices

If you want to get at a slice (part of a row) in a multidimensional
array, you're going to have to do some fancy subscripting.  That's
because while we have a nice synonym for single elements via the
pointer arrow for dereferencing, no such convenience exists for slices.

Here's how to do one operation using a loop.  We'll assume an @AoA
variable as before.

@part = ();
    $x = 4;
    for ($y = 7; $y < 13; $y++) {
	push @part, $AoA[$x][$y];
    }

That same loop could be replaced with a slice operation:

@part = @{$AoA[4]}[7..12];

or spaced out a bit:

@part = @{ $AoA[4] } [ 7..12 ];

But as you might well imagine, this can get pretty rough on the reader.

Ah, but what if you wanted a I<two-dimensional slice>, such as having
$x run from 4..8 and $y run from 7 to 12?  Hmm... here's the simple way:

@newAoA = ();
    for ($startx = $x = 4; $x <= 8; $x++) {
	for ($starty = $y = 7; $y <= 12; $y++) {
	    $newAoA[$x - $startx][$y - $starty] = $AoA[$x][$y];
	}
    }

We can reduce some of the looping through slices

for ($x = 4; $x <= 8; $x++) {
	push @newAoA, [ @{ $AoA[$x] } [ 7..12 ] ];
    }

If you were into Schwartzian Transforms, you would probably
have selected map for that

@newAoA = map { [ @{ $AoA[$_] } [ 7..12 ] ] } 4 .. 8;

Although if your manager accused you of seeking job security (or rapid
insecurity) through inscrutable code, it would be hard to argue. :-)
If I were you, I'd put that in a function:

@newAoA = splice_2D( \@AoA, 4 => 8, 7 => 12 );
    sub splice_2D {
	my $lrr = shift; 	# ref to array of array refs!
	my ($x_lo, $x_hi,
	    $y_lo, $y_hi) = @_;

return map {
	    [ @{ $lrr->[$_] } [ $y_lo .. $y_hi ] ]
	} $x_lo .. $x_hi;
    }

=head1 SEE ALSO

L<perldata>, L<perlref>, L<perldsc>

=head1 AUTHOR

Tom Christiansen <F<tchrist@perl.com>>

Last update: Tue Apr 26 18:30:55 MDT 2011

Cancel