usr
/
sbin
➕ New
📤 Upload
✎ Editing:
dracut
← Back
#!/bin/bash # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- # ex: ts=8 sw=4 sts=4 et filetype=sh # # Generator script for a dracut initramfs # Tries to retain some degree of compatibility with the command line # of the various mkinitrd implementations out there # # Copyright 2005-2013 Red Hat, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # unset BASH_ENV # store for logging dracut_args=( "$@" ) set -o pipefail usage() { [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut if [[ -f $dracutbasedir/dracut-version.sh ]]; then . $dracutbasedir/dracut-version.sh fi # 80x25 linebreak here ^ cat << EOF Usage: $0 [OPTION]... [<initramfs> [<kernel-version>]] Version: $DRACUT_VERSION Creates initial ramdisk images for preloading modules -h, --help Display all options If a [LIST] has multiple arguments, then you have to put these in quotes. For example: # dracut --add-drivers "module1 module2" ... EOF } long_usage() { [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut if [[ -f $dracutbasedir/dracut-version.sh ]]; then . $dracutbasedir/dracut-version.sh fi # 80x25 linebreak here ^ cat << EOF Usage: $0 [OPTION]... [<initramfs> [<kernel-version>]] Version: $DRACUT_VERSION Creates initial ramdisk images for preloading modules --kver [VERSION] Set kernel version to [VERSION]. -f, --force Overwrite existing initramfs file. -a, --add [LIST] Add a space-separated list of dracut modules. --rebuild Append arguments to those of existing image and rebuild -m, --modules [LIST] Specify a space-separated list of dracut modules to call when building the initramfs. Modules are located in /usr/lib/dracut/modules.d. -o, --omit [LIST] Omit a space-separated list of dracut modules. --force-add [LIST] Force to add a space-separated list of dracut modules to the default set of modules, when -H is specified. -d, --drivers [LIST] Specify a space-separated list of kernel modules to exclusively include in the initramfs. --add-drivers [LIST] Specify a space-separated list of kernel modules to add to the initramfs. --force-drivers [LIST] Specify a space-separated list of kernel modules to add to the initramfs and make sure they are tried to be loaded via modprobe same as passing rd.driver.pre=DRIVER kernel parameter. --omit-drivers [LIST] Specify a space-separated list of kernel modules not to add to the initramfs. --filesystems [LIST] Specify a space-separated list of kernel filesystem modules to exclusively include in the generic initramfs. -k, --kmoddir [DIR] Specify the directory, where to look for kernel modules --fwdir [DIR] Specify additional directories, where to look for firmwares, separated by : --kernel-only Only install kernel drivers and firmware files --no-kernel Do not install kernel drivers and firmware files --print-cmdline Print the kernel command line for the given disk layout --early-microcode Combine early microcode with ramdisk --no-early-microcode Do not combine early microcode with ramdisk --kernel-cmdline [PARAMETERS] Specify default kernel command line parameters --strip Strip binaries in the initramfs --nostrip Do not strip binaries in the initramfs --prelink Prelink binaries in the initramfs --noprelink Do not prelink binaries in the initramfs --hardlink Hardlink files in the initramfs --nohardlink Do not hardlink files in the initramfs --prefix [DIR] Prefix initramfs files with [DIR] --noprefix Do not prefix initramfs files --mdadmconf Include local /etc/mdadm.conf --nomdadmconf Do not include local /etc/mdadm.conf --lvmconf Include local /etc/lvm/lvm.conf --nolvmconf Do not include local /etc/lvm/lvm.conf --fscks [LIST] Add a space-separated list of fsck helpers. --nofscks Inhibit installation of any fsck helpers. --ro-mnt Mount / and /usr read-only by default. -h, --help This message --debug Output debug information of the build process --profile Output profile information of the build process -L, --stdlog [0-6] Specify logging level (to standard error) 0 - suppress any messages 1 - only fatal errors 2 - all errors 3 - warnings 4 - info 5 - debug info (here starts lots of output) 6 - trace info (and even more) -v, --verbose Increase verbosity level -q, --quiet Decrease verbosity level -c, --conf [FILE] Specify configuration file to use. Default: /etc/dracut.conf --confdir [DIR] Specify configuration directory to use *.conf files from. Default: /etc/dracut.conf.d --tmpdir [DIR] Temporary directory to be used instead of default /var/tmp. -l, --local Local mode. Use modules from the current working directory instead of the system-wide installed in /usr/lib/dracut/modules.d. Useful when running dracut from a git checkout. -H, --hostonly Host-Only mode: Install only what is needed for booting the local host instead of a generic host. -N, --no-hostonly Disables Host-Only mode --hostonly-mode <mode> Specify the hostonly mode to use. <mode> could be one of "sloppy" or "strict". "sloppy" mode is used by default. In "sloppy" hostonly mode, extra drivers and modules will be installed, so minor hardware change won't make the image unbootable (eg. changed keyboard), and the image is still portable among similar hosts. With "strict" mode enabled, anything not necessary for booting the local host in its current state will not be included, and modules may do some extra job to save more space. Minor change of hardware or environment could make the image unbootable. DO NOT use "strict" mode unless you know what you are doing. --hostonly-cmdline Store kernel command line arguments needed in the initramfs --no-hostonly-cmdline Do not store kernel command line arguments needed in the initramfs --no-hostonly-default-device Do not generate implicit host devices like root, swap, fstab, etc. Use "--mount" or "--add-device" to explicitly add devices as needed. --hostonly-i18n Install only needed keyboard and font files according to the host configuration (default). --no-hostonly-i18n Install all keyboard and font files available. --persistent-policy [POLICY] Use [POLICY] to address disks and partitions. POLICY can be any directory name found in /dev/disk. E.g. "by-uuid", "by-label" --fstab Use /etc/fstab to determine the root device. --add-fstab [FILE] Add file to the initramfs fstab --mount "[DEV] [MP] [FSTYPE] [FSOPTS]" Mount device [DEV] on mountpoint [MP] with filesystem [FSTYPE] and options [FSOPTS] in the initramfs --add-device "[DEV]" Bring up [DEV] in initramfs -i, --include [SOURCE] [TARGET] Include the files in the SOURCE directory into the Target directory in the final initramfs. If SOURCE is a file, it will be installed to TARGET in the final initramfs. -I, --install [LIST] Install the space separated list of files into the initramfs. --install-optional [LIST] Install the space separated list of files into the initramfs, if they exist. --gzip Compress the generated initramfs using gzip. This will be done by default, unless another compression option or --no-compress is passed. --bzip2 Compress the generated initramfs using bzip2. Make sure your kernel has bzip2 decompression support compiled in, otherwise you will not be able to boot. --lzma Compress the generated initramfs using lzma. Make sure your kernel has lzma support compiled in, otherwise you will not be able to boot. --xz Compress the generated initramfs using xz. Make sure that your kernel has xz support compiled in, otherwise you will not be able to boot. --lzo Compress the generated initramfs using lzop. Make sure that your kernel has lzo support compiled in, otherwise you will not be able to boot. --lz4 Compress the generated initramfs using lz4. Make sure that your kernel has lz4 support compiled in, otherwise you will not be able to boot. --compress [COMPRESSION] Compress the generated initramfs with the passed compression program. Make sure your kernel knows how to decompress the generated initramfs, otherwise you will not be able to boot. --no-compress Do not compress the generated initramfs. This will override any other compression options. --list-modules List all available dracut modules. -M, --show-modules Print included module's name to standard output during build. --keep Keep the temporary initramfs for debugging purposes --printsize Print out the module install size --sshkey [SSHKEY] Add ssh key to initramfs (use with ssh-client module) --logfile [FILE] Logfile to use (overrides configuration setting) If [LIST] has multiple arguments, then you have to put these in quotes. For example: # dracut --add-drivers "module1 module2" ... EOF } # function push() # push values to a stack # $1 = stack variable # $2.. values # example: # push stack 1 2 "3 4" push() { local _i local __stack=$1; shift for _i in "$@"; do eval ${__stack}'[${#'${__stack}'[@]}]="$_i"' done } # function pop() # pops the last value from a stack # assigns value to second argument variable # or echo to stdout, if no second argument # $1 = stack variable # $2 = optional variable to store the value # example: # pop stack val # val=$(pop stack) pop() { local __stack=$1; shift local __resultvar=$1 local _value; # check for empty stack eval '[[ ${#'${__stack}'[@]} -eq 0 ]] && return 1' eval _value='${'${__stack}'[${#'${__stack}'[@]}-1]}' if [[ "$__resultvar" ]]; then eval $__resultvar="'$_value'" else printf "%s" "$_value" fi eval unset ${__stack}'[${#'${__stack}'[@]}-1]' return 0 } # Little helper function for reading args from the commandline. # it automatically handles -a b and -a=b variants, and returns 1 if # we need to shift $3. read_arg() { # $1 = arg name # $2 = arg value # $3 = arg parameter local rematch='^[^=]*=(.*)$' if [[ $2 =~ $rematch ]]; then read "$1" <<< "${BASH_REMATCH[1]}" else read "$1" <<< "$3" # There is no way to shift our callers args, so # return 1 to indicate they should do it instead. return 1 fi } dropindirs_sort() { local suffix=$1; shift local -a files local f d for d in "$@"; do for i in "$d/"*"$suffix"; do if [[ -e "$i" ]]; then printf "%s\n" "${i##*/}" fi done done | sort -Vu | { readarray -t files for f in "${files[@]}"; do for d in "$@"; do if [[ -e "$d/$f" ]]; then printf "%s\n" "$d/$f" continue 2 fi done done } } rearrange_params() { # Workaround -i, --include taking 2 arguments set -- "${@/--include/++include}" # This prevents any long argument ending with "-i" # -i, like --opt-i but I think we can just prevent that set -- "${@/%-i/++include}" TEMP=$(unset POSIXLY_CORRECT; getopt \ -o "a:m:o:d:I:k:c:L:fvqlHhMN" \ --long kver: \ --long add: \ --long force-add: \ --long add-drivers: \ --long force-drivers: \ --long omit-drivers: \ --long modules: \ --long omit: \ --long drivers: \ --long filesystems: \ --long install: \ --long install-optional: \ --long fwdir: \ --long libdirs: \ --long fscks: \ --long add-fstab: \ --long mount: \ --long device: \ --long add-device: \ --long nofscks: \ --long ro-mnt \ --long kmoddir: \ --long conf: \ --long confdir: \ --long tmpdir: \ --long stdlog: \ --long compress: \ --long prefix: \ --long rebuild: \ --long force \ --long kernel-only \ --long no-kernel \ --long print-cmdline \ --long kernel-cmdline: \ --long strip \ --long nostrip \ --long prelink \ --long noprelink \ --long hardlink \ --long nohardlink \ --long noprefix \ --long mdadmconf \ --long nomdadmconf \ --long lvmconf \ --long nolvmconf \ --long debug \ --long profile \ --long sshkey: \ --long logfile: \ --long verbose \ --long quiet \ --long local \ --long hostonly \ --long host-only \ --long no-hostonly \ --long no-host-only \ --long hostonly-mode: \ --long hostonly-cmdline \ --long no-hostonly-cmdline \ --long no-hostonly-default-device \ --long persistent-policy: \ --long fstab \ --long help \ --long bzip2 \ --long lzma \ --long xz \ --long lzo \ --long lz4 \ --long no-compress \ --long gzip \ --long list-modules \ --long show-modules \ --long keep \ --long printsize \ --long regenerate-all \ --long noimageifnotneeded \ --long early-microcode \ --long no-early-microcode \ --long no-hostonly-i18n \ --long hostonly-i18n \ -- "$@") if (( $? != 0 )); then usage exit 1 fi } verbosity_mod_l=0 unset kernel unset outfile rearrange_params "$@" eval set -- "$TEMP" # parse command line args to check if '--rebuild' option is present unset append_args_l unset rebuild_file while : do if [ "$1" == "--" ]; then shift; break fi if [ "$1" == "--rebuild" ]; then append_args_l="yes" rebuild_file=$2 if [ ! -e $rebuild_file ]; then echo "Image file '$rebuild_file', for rebuild, does not exist!" exit 1 fi abs_rebuild_file=$(readlink -f "$rebuild_file") && rebuild_file="$abs_rebuild_file" shift; continue fi shift done # get output file name and kernel version from command line arguments while (($# > 0)); do case ${1%%=*} in ++include) shift 2;; *) if ! [[ ${outfile+x} ]]; then outfile=$1 elif ! [[ ${kernel+x} ]]; then kernel=$1 else printf "\nUnknown arguments: %s\n\n" "$*" >&2 usage; exit 1; fi ;; esac shift done # extract input image file provided with rebuild option to get previous parameters, if any if [[ $append_args_l == "yes" ]]; then unset rebuild_param # determine resultant file if ! [[ $outfile ]]; then outfile=$rebuild_file fi if ! rebuild_param=$(lsinitrd $rebuild_file '*lib/dracut/build-parameter.txt'); then echo "Image '$rebuild_file' has no rebuild information stored" exit 1 fi # prepend previous parameters to current command line args if [[ $rebuild_param ]]; then TEMP="$rebuild_param $TEMP" eval set -- "$TEMP" rearrange_params "$@" fi # clean the temporarily used scratch-pad directory rm -rf $scratch_dir fi unset PARMS_TO_STORE PARMS_TO_STORE="" eval set -- "$TEMP" while :; do if [ $1 != "--" ] && [ $1 != "--rebuild" ]; then PARMS_TO_STORE+=" $1"; fi case $1 in --kver) kernel="$2"; PARMS_TO_STORE+=" '$2'"; shift;; -a|--add) push add_dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --force-add) push force_add_dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --add-drivers) push add_drivers_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --force-drivers) push force_drivers_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --omit-drivers) push omit_drivers_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; -m|--modules) push dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; -o|--omit) push omit_dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; -d|--drivers) push drivers_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --filesystems) push filesystems_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; -I|--install) push install_items_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --install-optional) push install_optional_items_l \ "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --fwdir) push fw_dir_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --libdirs) push libdirs_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --fscks) push fscks_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --add-fstab) push add_fstab_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --mount) push fstab_lines "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --add-device|--device) push add_device_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --kernel-cmdline) push kernel_cmdline_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --nofscks) nofscks_l="yes";; --ro-mnt) ro_mnt_l="yes";; -k|--kmoddir) drivers_dir_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; -c|--conf) conffile="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --confdir) confdir="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --tmpdir) tmpdir_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; -L|--stdlog) stdloglvl_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --compress) compress_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --prefix) prefix_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --rebuild) if [ $rebuild_file == $outfile ]; then force=yes fi shift ;; -f|--force) force=yes;; --kernel-only) kernel_only="yes"; no_kernel="no";; --no-kernel) kernel_only="no"; no_kernel="yes";; --print-cmdline) print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";; --early-microcode) early_microcode_l="yes";; --no-early-microcode) early_microcode_l="no";; --strip) do_strip_l="yes";; --nostrip) do_strip_l="no";; --prelink) do_prelink_l="yes";; --noprelink) do_prelink_l="no";; --hardlink) do_hardlink_l="yes";; --nohardlink) do_hardlink_l="no";; --noprefix) prefix_l="/";; --mdadmconf) mdadmconf_l="yes";; --nomdadmconf) mdadmconf_l="no";; --lvmconf) lvmconf_l="yes";; --nolvmconf) lvmconf_l="no";; --debug) debug="yes";; --profile) profile="yes";; --sshkey) sshkey="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --logfile) logfile_l="$2"; shift;; -v|--verbose) ((verbosity_mod_l++));; -q|--quiet) ((verbosity_mod_l--));; -l|--local) allowlocal="yes" [[ -f "$(readlink -f "${0%/*}")/dracut-init.sh" ]] \ && dracutbasedir="$(readlink -f "${0%/*}")" ;; -H|--hostonly|--host-only) hostonly_l="yes" ;; -N|--no-hostonly|--no-host-only) hostonly_l="no" ;; --hostonly-mode) hostonly_mode_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --hostonly-cmdline) hostonly_cmdline_l="yes" ;; --hostonly-i18n) i18n_install_all_l="no" ;; --no-hostonly-i18n) i18n_install_all_l="yes" ;; --no-hostonly-cmdline) hostonly_cmdline_l="no" ;; --no-hostonly-default-device) hostonly_default_device="no" ;; --persistent-policy) persistent_policy_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;; --fstab) use_fstab_l="yes" ;; -h|--help) long_usage; exit 1 ;; -i|--include) push include_src "$2"; PARMS_TO_STORE+=" '$2'"; shift;; --bzip2) compress_l="bzip2";; --lzma) compress_l="lzma";; --xz) compress_l="xz";; --lzo) compress_l="lzo";; --lz4) compress_l="lz4";; --no-compress) _no_compress_l="cat";; --gzip) compress_l="gzip";; --list-modules) do_list="yes";; -M|--show-modules) show_modules_l="yes" ;; --keep) keep="yes";; --printsize) printsize="yes";; --regenerate-all) regenerate_all="yes";; --noimageifnotneeded) noimageifnotneeded="yes";; --) shift; break;; *) # should not even reach this point printf "\n!Unknown option: '%s'\n\n" "$1" >&2; usage; exit 1;; esac shift done # getopt cannot handle multiple arguments, so just handle "-I,--include" # the old fashioned way while (($# > 0)); do if [ ${1%%=*} == "++include" ]; then push include_src "$2" push include_target "$3" PARMS_TO_STORE+=" --include '$2' '$3'" shift 2 fi shift done if [[ $regenerate_all == "yes" ]]; then ret=0 if [[ $kernel ]]; then printf -- "--regenerate-all cannot be called with a kernel version\n" >&2 exit 1 fi if [[ $outfile ]]; then printf -- "--regenerate-all cannot be called with a image file\n" >&2 exit 1 fi ((len=${#dracut_args[@]})) for ((i=0; i < len; i++)); do [[ ${dracut_args[$i]} == "--regenerate-all" ]] && \ unset dracut_args[$i] done cd /lib/modules for i in *; do [[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue dracut --kver="$i" "${dracut_args[@]}" ((ret+=$?)) done exit $ret fi if ! [[ $kernel ]]; then kernel=$(uname -r) fi if [[ $kernel ]]; then if ! [[ -d /lib/modules/$kernel ]] && [[ $no_kernel != yes ]]; then printf -- "Kernel version $kernel has no module directory /lib/modules/$kernel\n" >&2 fi fi if ! [[ $outfile ]]; then [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id if [[ $MACHINE_ID ]] && ( [[ -d /boot/${MACHINE_ID} ]] || [[ -L /boot/${MACHINE_ID} ]] ); then outfile="/boot/${MACHINE_ID}/$kernel/initrd" else outfile="/boot/initramfs-$kernel.img" fi fi for i in /usr/sbin /sbin /usr/bin /bin; do rl=$i if [ -L "$i" ]; then rl=$(readlink -f $i) fi if [[ "$NPATH" != *:$rl* ]] ; then NPATH+=":$rl" fi done export PATH="${NPATH#:}" unset LC_MESSAGES unset LC_CTYPE export LC_ALL=C export LANG=C unset NPATH unset LD_LIBRARY_PATH unset LD_PRELOAD unset GREP_OPTIONS export DRACUT_LOG_LEVEL=warning [[ $debug ]] && { export DRACUT_LOG_LEVEL=debug export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): '; set -x } [[ $profile ]] && { export PS4='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: '; set -x debug=yes } [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut # if we were not passed a config file, try the default one if [[ ! -f $conffile ]]; then if [[ $allowlocal ]]; then conffile="$dracutbasedir/dracut.conf" else conffile="/etc/dracut.conf" fi fi if [[ ! -d $confdir ]]; then if [[ $allowlocal ]]; then confdir="$dracutbasedir/dracut.conf.d" else confdir="/etc/dracut.conf.d" fi fi # source our config file [[ -f $conffile ]] && . "$conffile" # source our config dir for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d"); do [[ -e $f ]] && . "$f" done # these optins add to the stuff in the config file if (( ${#add_dracutmodules_l[@]} )); then while pop add_dracutmodules_l val; do add_dracutmodules+=" $val " done fi if (( ${#force_add_dracutmodules_l[@]} )); then while pop force_add_dracutmodules_l val; do force_add_dracutmodules+=" $val " done fi if (( ${#fscks_l[@]} )); then while pop fscks_l val; do fscks+=" $val " done fi if (( ${#add_fstab_l[@]} )); then while pop add_fstab_l val; do add_fstab+=" $val " done fi if (( ${#fstab_lines_l[@]} )); then while pop fstab_lines_l val; do push fstab_lines $val done fi if (( ${#install_items_l[@]} )); then while pop install_items_l val; do install_items+=" $val " done fi if (( ${#install_optional_items_l[@]} )); then while pop install_optional_items_l val; do install_optional_items+=" $val " done fi # these options override the stuff in the config file if (( ${#dracutmodules_l[@]} )); then dracutmodules='' while pop dracutmodules_l val; do dracutmodules+="$val " done fi if (( ${#omit_dracutmodules_l[@]} )); then omit_dracutmodules='' while pop omit_dracutmodules_l val; do omit_dracutmodules+="$val " done fi if (( ${#filesystems_l[@]} )); then filesystems='' while pop filesystems_l val; do filesystems+="$val " done fi if (( ${#fw_dir_l[@]} )); then fw_dir='' while pop fw_dir_l val; do fw_dir+="$val " done fi if (( ${#libdirs_l[@]} )); then libdirs='' while pop libdirs_l val; do libdirs+="$val " done fi [[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l [[ ! $stdloglvl ]] && stdloglvl=4 stdloglvl=$((stdloglvl + verbosity_mod_l)) ((stdloglvl > 6)) && stdloglvl=6 ((stdloglvl < 0)) && stdloglvl=0 [[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l [[ $do_strip_l ]] && do_strip=$do_strip_l [[ $do_strip ]] || do_strip=yes [[ $do_prelink_l ]] && do_prelink=$do_prelink_l [[ $do_prelink ]] || do_prelink=yes [[ $do_hardlink_l ]] && do_hardlink=$do_hardlink_l [[ $do_hardlink ]] || do_hardlink=yes [[ $prefix_l ]] && prefix=$prefix_l [[ $prefix = "/" ]] && unset prefix [[ $hostonly_l ]] && hostonly=$hostonly_l [[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l [[ $hostonly_mode_l ]] && hostonly_mode=$hostonly_mode_l [[ $i18n_install_all_l ]] && i18n_install_all=$i18n_install_all_l [[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l [[ $use_fstab_l ]] && use_fstab=$use_fstab_l [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l [[ $lvmconf_l ]] && lvmconf=$lvmconf_l [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut [[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware /lib/firmware/$kernel" [[ $tmpdir_l ]] && tmpdir="$tmpdir_l" [[ $tmpdir ]] || tmpdir=/var/tmp [[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS [[ $compress_l ]] && compress=$compress_l [[ $show_modules_l ]] && show_modules=$show_modules_l [[ $nofscks_l ]] && nofscks="yes" [[ $ro_mnt_l ]] && ro_mnt="yes" [[ $early_microcode_l ]] && early_microcode=$early_microcode_l [[ $early_microcode ]] || early_microcode=no [[ $logfile_l ]] && logfile="$logfile_l" # eliminate IFS hackery when messing with fw_dir fw_dir=${fw_dir//:/ } # handle compression options. [[ $compress ]] || compress="gzip" case $compress in bzip2) compress="bzip2 -9";; lzma) compress="lzma -9 -T0";; xz) compress="xz --check=crc32 --lzma2=dict=1MiB -T0";; gzip) compress="gzip -9"; command -v pigz > /dev/null 2>&1 && compress="pigz -9";; lzo) compress="lzop -9";; lz4) compress="lz4 -l -9";; esac if [[ $_no_compress_l = "cat" ]]; then compress="cat" fi [[ $hostonly = yes ]] && hostonly="-h" [[ $hostonly != "-h" ]] && unset hostonly case $hostonly_mode in '') [[ $hostonly ]] && hostonly_mode="sloppy" ;; sloppy|strict) if [[ ! $hostonly ]]; then unset hostonly_mode fi ;; *) printf "%s\n" "dracut: Invalid hostonly mode '$hostonly_mode'." >&2 exit 1 esac readonly TMPDIR="$tmpdir" readonly DRACUT_TMPDIR="$(mktemp -p "$TMPDIR/" -d -t dracut.XXXXXX)" [ -d "$DRACUT_TMPDIR" ] || { printf "%s\n" "dracut: mktemp -p '$TMPDIR/' -d -t dracut.XXXXXX failed." >&2 exit 1 } # clean up after ourselves no matter how we die. trap ' ret=$?; [[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; }; exit $ret; ' EXIT # clean up after ourselves no matter how we die. trap 'exit 1;' SIGINT readonly initdir="${DRACUT_TMPDIR}/initramfs" mkdir "$initdir" export DRACUT_KERNEL_LAZY="1" export DRACUT_RESOLVE_LAZY="1" if [[ $print_cmdline ]]; then stdloglvl=0 sysloglvl=0 fileloglvl=0 kmsgloglvl=0 fi if [[ -f $dracutbasedir/dracut-version.sh ]]; then . $dracutbasedir/dracut-version.sh fi if [[ -f $dracutbasedir/dracut-init.sh ]]; then . $dracutbasedir/dracut-init.sh else printf "%s\n" "dracut: Cannot find $dracutbasedir/dracut-init.sh." >&2 printf "%s\n" "dracut: Are you running from a git checkout?" >&2 printf "%s\n" "dracut: Try passing -l as an argument to $0" >&2 exit 1 fi if ! [[ $print_cmdline ]]; then inst /bin/sh if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R "$initdir/bin/sh" &>/dev/null; then unset DRACUT_RESOLVE_LAZY export DRACUT_RESOLVE_DEPS=1 fi rm -fr -- ${initdir}/* fi # Verify bash version, current minimum is 3.1 if (( BASH_VERSINFO[0] < 4 )); then dfatal 'You need at least Bash 4 to use dracut, sorry.' exit 1 fi dracutfunctions=$dracutbasedir/dracut-functions.sh export dracutfunctions case "$(arch)" in i686|x86_64) ;; *) if [[ $early_microcode = yes ]]; then early_microcode=no dinfo "Disabling early microcode for $(arch)" fi ;; esac if [[ $early_microcode = yes ]] || ( [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]] ); then readonly early_cpio_dir="${DRACUT_TMPDIR}/earlycpio" mkdir "$early_cpio_dir" fi if (( ${#drivers_l[@]} )); then drivers='' while pop drivers_l val; do drivers+="$val " done fi drivers=${drivers/-/_} if (( ${#add_drivers_l[@]} )); then while pop add_drivers_l val; do add_drivers+=" $val " done fi add_drivers=${add_drivers/-/_} if (( ${#force_drivers_l[@]} )); then while pop force_drivers_l val; do force_drivers+=" $val " done fi force_drivers=${force_drivers/-/_} if (( ${#omit_drivers_l[@]} )); then while pop omit_drivers_l val; do omit_drivers+=" $val " done fi omit_drivers=${omit_drivers/-/_} if (( ${#kernel_cmdline_l[@]} )); then while pop kernel_cmdline_l val; do kernel_cmdline+=" $val " done fi omit_drivers_corrected="" for d in $omit_drivers; do [[ " $drivers $add_drivers " == *\ $d\ * ]] && continue [[ " $drivers $force_drivers " == *\ $d\ * ]] && continue omit_drivers_corrected+="$d|" done omit_drivers="${omit_drivers_corrected%|}" unset omit_drivers_corrected # prepare args for logging for ((i=0; i < ${#dracut_args[@]}; i++)); do [[ "${dracut_args[$i]}" == *\ * ]] && \ dracut_args[$i]="\"${dracut_args[$i]}\"" #" keep vim happy done dinfo "Executing: $0 ${dracut_args[@]}" [[ $do_list = yes ]] && { for mod in $dracutbasedir/modules.d/*; do [[ -d $mod ]] || continue; [[ -e $mod/install || -e $mod/installkernel || \ -e $mod/module-setup.sh ]] || continue printf "%s\n" "${mod##*/??}" done exit 0 } # This is kinda legacy -- eventually it should go away. case $dracutmodules in ""|auto) dracutmodules="all" ;; esac abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile" if [[ -d $srcmods ]]; then if ! [[ -f $srcmods/modules.dep ]]; then if [[ -n "$(find "$srcmods" -name '*.ko*')" ]]; then dfatal "$srcmods/modules.dep is missing. Did you run depmod?" exit 1 else dwarn "$srcmods/modules.dep is missing. Did you run depmod?" fi fi fi if [[ ! $print_cmdline ]]; then if [[ -f $outfile && ! $force ]]; then dfatal "Will not override existing initramfs ($outfile) without --force" exit 1 fi outdir=${outfile%/*} [[ $outdir ]] || outdir="/" if [[ ! -d "$outdir" ]]; then dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible." exit 1 elif [[ ! -w "$outdir" ]]; then dfatal "No permission to write to $outdir." exit 1 elif [[ -f "$outfile" && ! -w "$outfile" ]]; then dfatal "No permission to write $outfile." exit 1 fi fi # Need to be able to have non-root users read stuff (rpcbind etc) chmod 755 "$initdir" if [[ $hostonly ]]; then for i in /sys /proc /run /dev; do if ! findmnt --target "$i" &>/dev/null; then dwarning "Turning off host-only mode: '$i' is not mounted!" unset hostonly fi done fi declare -A host_fs_types for line in "${fstab_lines[@]}"; do set -- $line #dev mp fs fsopts push host_devs "$1" host_fs_types["$1"]="$3" done for f in $add_fstab; do [[ -e $f ]] || continue while read dev rest; do push host_devs "$dev" done < "$f" done for dev in $add_device; do push host_devs "$dev" done if (( ${#add_device_l[@]} )); then while pop add_device_l val; do add_device+=" $val " push host_devs "$val" done fi if [[ $hostonly ]] && [[ "$hostonly_default_device" != "no" ]]; then # in hostonly mode, determine all devices, which have to be accessed # and examine them for filesystem types for mp in \ "/" \ "/etc" \ "/bin" \ "/sbin" \ "/lib" \ "/lib64" \ "/usr" \ "/usr/bin" \ "/usr/sbin" \ "/usr/lib" \ "/usr/lib64" \ "/boot" \ "/boot/efi" \ ; do mp=$(readlink -f "$mp") mountpoint "$mp" >/dev/null 2>&1 || continue _dev=$(find_block_device "$mp") _bdev=$(readlink -f "/dev/block/$_dev") [[ -b $_bdev ]] && _dev=$_bdev push host_devs $_dev [[ "$mp" == "/" ]] && root_dev="$_dev" push host_devs "$_dev" done if [[ -f /proc/swaps ]] && [[ -f /etc/fstab ]]; then while read dev type rest; do [[ -b $dev ]] || continue [[ "$type" == "partition" ]] || continue while read _d _m _t _o _r; do [[ "$_d" == \#* ]] && continue [[ $_d ]] || continue [[ $_t != "swap" ]] && continue [[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue [[ "$_o" == *noauto* ]] && continue _d=$(expand_persistent_dev "$_d") [[ "$_d" -ef "$dev" ]] || continue if [[ -f /etc/crypttab ]]; then while read _mapper _a _p _o || [ -n "$_mapper" ]; do [[ $_mapper = \#* ]] && continue [[ "$_d" -ef /dev/mapper/"$_mapper" ]] || continue [[ "$_o" ]] || _o="$_p" # skip entries with password files [[ "$_p" == /* ]] && [[ -f $_p ]] && continue 2 # skip mkswap swap [[ $_o == *swap* ]] && continue 2 done < /etc/crypttab fi _dev="$(readlink -f "$dev")" push host_devs "$_dev" push swap_devs "$_dev" break done < /etc/fstab done < /proc/swaps fi # collect all "x-initrd.mount" entries from /etc/fstab if [[ -f /etc/fstab ]]; then while read _d _m _t _o _r || [ -n "$_d" ]; do [[ "$_d" == \#* ]] && continue [[ $_d ]] || continue [[ "$_o" != *x-initrd.mount* ]] && continue _dev=$(expand_persistent_dev "$_d") _dev="$(readlink -f "$_dev")" [[ -b $_dev ]] && push host_devs "$_dev" done < /etc/fstab fi fi if [[ $hostonly ]]; then # record all host modaliases declare -A host_modalias find /sys/devices/ -name uevent -print > "$initdir/.modalias" while read m; do while read line; do [[ "$line" != MODALIAS\=* ]] && continue modalias="${line##MODALIAS=}" && [[ $modalias ]] && host_modalias["$modalias"]=1 break done < "$m" done < "$initdir/.modalias" rm -f -- "$initdir/.modalias" while read _k _s _v; do [ "$_k" != "name" -a "$_k" != "driver" ] && continue host_modalias["$_v"]=1 done </proc/crypto # check /proc/modules declare -A host_modules declare new_module_found=1 declare tmpmodules=$(mktemp --tmpdir="$TMPDIR/" -t proc_modules.XXXXXX) while [[ $new_module_found ]]; do new_module_found= sleep 0.1 #reading from procfs can be broken, so copy the file elsewhere cp -f /proc/modules "$tmpmodules" while read m rest; do [ -z "$m" ] && continue [[ ${host_modules["$m"]} ]] && continue host_modules["$m"]=1 new_module_found=1 done < "$tmpmodules" done rm "$tmpmodules" unset new_module_found unset tmpmodules fi unset m unset rest _get_fs_type() { [[ $1 ]] || return if [[ -b /dev/block/$1 ]]; then ID_FS_TYPE=$(get_fs_env "/dev/block/$1") && host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE" return 1 fi if [[ -b $1 ]]; then ID_FS_TYPE=$(get_fs_env "$1") && host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE" return 1 fi if fstype=$(find_dev_fstype "$1"); then host_fs_types["$1"]="$fstype" return 1 fi return 1 } for dev in "${host_devs[@]}"; do _get_fs_type "$dev" check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")" done for dev in "${!host_fs_types[@]}"; do [[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue rootopts=$(find_dev_fsopts "$dev") if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then journaldev=$(fs_get_option $rootopts "jdev") elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then journaldev=$(fs_get_option $rootopts "logdev") fi if [[ $journaldev ]]; then dev="$(readlink -f "$dev")" push host_devs "$dev" _get_fs_type "$dev" check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")" fi done # also put the additional filesystems in host_fs_types # so that the according modules are installed. for fs in $filesystems; do host_fs_types[$fs]="$fs" done [[ -d $udevdir ]] \ || udevdir="$(pkg-config udev --variable=udevdir 2>/dev/null)" if ! [[ -d "$udevdir" ]]; then [[ -d /lib/udev ]] && udevdir=/lib/udev [[ -d /usr/lib/udev ]] && udevdir=/usr/lib/udev fi [[ -d $systemdutildir ]] \ || systemdutildir=$(pkg-config systemd --variable=systemdutildir 2>/dev/null) if ! [[ -d "$systemdutildir" ]]; then [[ -d /lib/systemd ]] && systemdutildir=/lib/systemd [[ -d /usr/lib/systemd ]] && systemdutildir=/usr/lib/systemd fi [[ -d $systemdsystemunitdir ]] \ || systemdsystemunitdir=$(pkg-config systemd --variable=systemdsystemunitdir 2>/dev/null) [[ -d "$systemdsystemunitdir" ]] || systemdsystemunitdir=${systemdutildir}/system [[ -d $systemdsystemconfdir ]] \ || systemdsystemconfdir=$(pkg-config systemd --variable=systemdsystemconfdir 2>/dev/null) [[ -d "$systemdsystemconfdir" ]] || systemdsystemconfdir=/etc/systemd/system [[ -d $tmpfilesdir ]] \ || tmpfilesdir=$(pkg-config systemd --variable=tmpfilesdir 2>/dev/null) if ! [[ -d "$tmpfilesdir" ]]; then [[ -f /lib/tmpfiles.d ]] && tmpfilesdir=/lib/tmpfiles.d [[ -f /usr/lib/tmpfiles.d ]] && tmpfilesdir=/usr/lib/tmpfiles.d fi export initdir dracutbasedir \ dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \ mods_to_load \ fw_dir drivers_dir debug no_kernel kernel_only \ omit_drivers mdadmconf lvmconf root_dev \ use_fstab fstab_lines libdirs fscks nofscks ro_mnt \ stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \ debug host_fs_types host_devs swap_devs sshkey add_fstab \ DRACUT_VERSION udevdir prefix filesystems drivers \ systemdutildir systemdsystemunitdir systemdsystemconfdir \ host_modalias host_modules hostonly_cmdline loginstall \ tmpfilesdir mods_to_load="" # check all our modules to see if they should be sourced. # This builds a list of modules that we will install next. for_each_module_dir check_module for_each_module_dir check_mount dracut_module_included "fips" && export DRACUT_FIPS_MODE=1 if [[ $print_cmdline ]]; then modules_loaded=" " # source our modules. for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]} module_cmdline "$_d_mod" done unset moddir printf "\n" exit 0 fi # Create some directory structure first [[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}" [[ -h /lib ]] || mkdir -m 0755 -p "${initdir}${prefix}/lib" [[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib" if [[ $prefix ]]; then for d in bin etc lib sbin tmp usr var $libdirs; do [[ "$d" == */* ]] && continue ln -sfn "${prefix#/}/${d#/}" "$initdir/$d" done fi if [[ $kernel_only != yes ]]; then for d in usr/bin usr/sbin bin etc lib sbin tmp usr var $libdirs; do [[ -e "${initdir}${prefix}/$d" ]] && continue if [ -L "/$d" ]; then inst_symlink "/$d" "${prefix}/$d" else mkdir -m 0755 -p "${initdir}${prefix}/$d" fi done for d in dev proc sys sysroot root run; do if [ -L "/$d" ]; then inst_symlink "/$d" else mkdir -m 0755 -p "$initdir/$d" fi done ln -sfn ../run "$initdir/var/run" ln -sfn ../run/lock "$initdir/var/lock" else for d in lib "$libdir"; do [[ -e "${initdir}${prefix}/$d" ]] && continue if [ -h "/$d" ]; then inst "/$d" "${prefix}/$d" else mkdir -m 0755 -p "${initdir}${prefix}/$d" fi done fi if [[ $kernel_only != yes ]]; then mkdir -p "${initdir}/etc/cmdline.d" for _d in $hookdirs; do mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d done if [[ "$UID" = "0" ]]; then [ -c ${initdir}/dev/null ] || mknod ${initdir}/dev/null c 1 3 [ -c ${initdir}/dev/kmsg ] || mknod ${initdir}/dev/kmsg c 1 11 [ -c ${initdir}/dev/console ] || mknod ${initdir}/dev/console c 5 1 fi fi _isize=0 #initramfs size modules_loaded=" " # source our modules. for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]} if [[ "$mods_to_load" == *\ $_d_mod\ * ]]; then if [[ $show_modules = yes ]]; then printf "%s\n" "$_d_mod" else dinfo "*** Including module: $_d_mod ***" fi if [[ $kernel_only == yes ]]; then module_installkernel "$_d_mod" || { dfatal "installkernel failed in module $_d_mod" exit 1 } else module_install "$_d_mod" if [[ $no_kernel != yes ]]; then module_installkernel "$_d_mod" || { dfatal "installkernel failed in module $_d_mod" exit 1 } fi fi mods_to_load=${mods_to_load// $_d_mod /} modules_loaded+="$_d_mod " #print the module install size if [ -n "$printsize" ]; then _isize_new=$(du -sk ${initdir}|cut -f1) _isize_delta=$((_isize_new - _isize)) printf "%s\n" "$_d_mod install size: ${_isize_delta}k" _isize=$_isize_new fi fi done unset moddir for i in $modules_loaded; do mkdir -p $initdir/lib/dracut printf "%s\n" "$i" >> $initdir/lib/dracut/modules.txt done dinfo "*** Including modules done ***" ## final stuff that has to happen if [[ $no_kernel != yes ]]; then if [[ $hostonly ]]; then echo "$(get_loaded_kernel_modules)" > $initdir/lib/dracut/loaded-kernel-modules.txt fi if [[ $drivers ]]; then hostonly='' instmods $drivers fi if [[ $add_drivers ]]; then hostonly='' instmods -c $add_drivers fi if [[ $force_drivers ]]; then hostonly='' instmods -c $force_drivers rm -f $initdir/etc/cmdline.d/20-force_driver.conf for mod in $force_drivers; do echo "rd.driver.pre=$mod" >>$initdir/etc/cmdline.d/20-force_drivers.conf done fi if [[ $filesystems ]]; then hostonly='' instmods -c $filesystems fi dinfo "*** Installing kernel module dependencies and firmware ***" dracut_kernel_post dinfo "*** Installing kernel module dependencies and firmware done ***" if [[ $noimageifnotneeded == yes ]] && [[ $hostonly ]]; then if [[ ! -f "$initdir/lib/dracut/need-initqueue" ]] && \ [[ -f ${initdir}/lib/modules/$kernel/modules.dep && ! -s ${initdir}/lib/modules/$kernel/modules.dep ]]; then for i in ${initdir}/etc/cmdline.d/*.conf; do # We need no initramfs image and do not generate one. [[ $i == "${initdir}/etc/cmdline.d/*.conf" ]] && exit 0 done fi fi fi if [[ $kernel_only != yes ]]; then (( ${#install_items[@]} > 0 )) && inst_multiple ${install_items[@]} (( ${#install_optional_items[@]} > 0 )) && inst_multiple -o ${install_optional_items[@]} [[ $kernel_cmdline ]] && printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf" while pop fstab_lines line; do line=($line) [ -z "${line[3]}" ] && line[3]="defaults" [ -z "${line[4]}" ] && line[4]="0" [ -z "${line[5]}" ] && line[5]="2" strstr "${line[2]}" "nfs" && line[5]="0" echo "${line[@]}" >> "${initdir}/etc/fstab" done for f in $add_fstab; do cat "$f" >> "${initdir}/etc/fstab" done if [ -d ${initdir}/$systemdutildir ]; then mkdir -p ${initdir}/etc/conf.d { printf "%s\n" "systemdutildir=\"$systemdutildir\"" printf "%s\n" "systemdsystemunitdir=\"$systemdsystemunitdir\"" printf "%s\n" "systemdsystemconfdir=\"$systemdsystemconfdir\"" } > ${initdir}/etc/conf.d/systemd.conf fi if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then dinfo "*** Resolving executable dependencies ***" find "$initdir" -type f \ '(' -perm -0100 -or -perm -0010 -or -perm -0001 ')' \ -not -path '*.ko' -print0 \ | xargs -r -0 $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R ${DRACUT_FIPS_MODE:+-H} -- dinfo "*** Resolving executable dependencies done***" fi fi while pop include_src src && pop include_target target; do if [[ $src && $target ]]; then if [[ -f $src ]]; then inst $src $target else ddebug "Including directory: $src" destdir="${initdir}/${target}" mkdir -p "$destdir" # check for preexisting symlinks, so we can cope with the # symlinks to $prefix # Objectname is a file or a directory for objectname in "$src"/*; do [[ -e "$objectname" || -h "$objectname" ]] || continue if [[ -d "$objectname" ]]; then # objectname is a directory, let's compute the final directory name object_destdir=${destdir}/${objectname#$src/} if ! [[ -e "$object_destdir" ]]; then mkdir -m 0755 -p "$object_destdir" chmod --reference="$objectname" "$object_destdir" fi cp --reflink=auto --sparse=auto -fa -t "$object_destdir" "$objectname"/* else cp --reflink=auto --sparse=auto -fa -t "$destdir" "$objectname" fi done fi fi done if [[ $kernel_only != yes ]]; then # make sure that library links are correct and up to date for f in /etc/ld.so.conf /etc/ld.so.conf.d/*; do [[ -f $f ]] && inst_simple "$f" done if ! ldconfig -r "$initdir"; then if [[ $UID = 0 ]]; then derror "ldconfig exited ungracefully" else derror "ldconfig might need uid=0 (root) for chroot()" fi fi fi PRELINK_BIN="$(command -v prelink)" if [[ $UID = 0 ]] && [[ $PRELINK_BIN ]]; then if [[ $DRACUT_FIPS_MODE ]]; then dinfo "*** Installing prelink files ***" inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf /etc/prelink.cache elif [[ $do_prelink == yes ]]; then dinfo "*** Pre-linking files ***" inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf chroot "$initdir" "$PRELINK_BIN" -a rm -f -- "$initdir/$PRELINK_BIN" rm -fr -- "$initdir"/etc/prelink.* dinfo "*** Pre-linking files done ***" fi fi if [[ $do_hardlink = yes ]] && command -v hardlink >/dev/null; then dinfo "*** Hardlinking files ***" hardlink "$initdir" 2>&1 dinfo "*** Hardlinking files done ***" fi # strip binaries if [[ $do_strip = yes ]] ; then for p in strip xargs find; do if ! type -P $p >/dev/null; then dinfo "Could not find '$p'. Not stripping the initramfs." do_strip=no fi done fi if [[ $do_strip = yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then dinfo "*** Stripping files ***" find "$initdir" -type f \ -executable -not -path '*/lib/modules/*.ko' -print0 \ | xargs -r -0 strip -g 2>/dev/null # strip kernel modules, but do not touch signed modules find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \ | while read -r -d $'\0' f; do SIG=$(tail -c 28 "$f") [[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; } done | xargs -r -0 strip -g dinfo "*** Stripping files done ***" fi if [[ $early_microcode = yes ]]; then dinfo "*** Generating early-microcode cpio image contents ***" ucode_dir=(amd-ucode intel-ucode) ucode_dest=(AuthenticAMD.bin GenuineIntel.bin) _dest_dir="$early_cpio_dir/d/kernel/x86/microcode" _dest_idx="0 1" mkdir -p $_dest_dir if [[ $hostonly ]]; then [[ $(get_cpu_vendor) == "AMD" ]] && _dest_idx="0" [[ $(get_cpu_vendor) == "Intel" ]] && _dest_idx="1" fi for idx in $_dest_idx; do _fw=${ucode_dir[$idx]} for _fwdir in $fw_dir; do if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then _src="*" dinfo "*** Constructing ${ucode_dest[$idx]} ****" if [[ $hostonly ]]; then _src=$(get_ucode_file) [[ $_src ]] || break [[ -r $_fwdir/$_fw/$_src ]] || break fi for i in $_fwdir/$_fw/$_src; do [ -e "$i" ] && break break 2 done for i in $_fwdir/$_fw/$_src; do [[ -e "$i" ]] || continue # skip gpg files str_ends "$i" ".asc" && continue cat "$i" >> $_dest_dir/${ucode_dest[$idx]} done create_early_cpio="yes" fi done done if ! [[ $create_early_cpio = yes ]]; then dinfo "*** No early-microcode cpio image needed ***" fi fi if [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]]; then dinfo "*** Packaging ACPI tables to override BIOS provided ones ***" _dest_dir="$early_cpio_dir/d/kernel/firmware/acpi" mkdir -p $_dest_dir for table in $acpi_table_dir/*.aml; do dinfo " Adding ACPI table: $table" cp $table $_dest_dir create_early_cpio="yes" done fi dinfo "*** Store current command line parameters ***" if ! ( echo $PARMS_TO_STORE > $initdir/lib/dracut/build-parameter.txt ); then dfatal "Could not store the current command line parameters" exit 1 fi rm -f -- "$outfile" dinfo "*** Creating image file ***" [[ "$UID" != 0 ]] && cpio_owner_root="-R 0:0" if [[ $create_early_cpio = yes ]]; then dinfo "*** Creating microcode section ***" echo 1 > "$early_cpio_dir/d/early_cpio" # The microcode blob is _before_ the initramfs blob, not after if ! ( umask 077 cd "$early_cpio_dir/d" find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet > "${DRACUT_TMPDIR}/initramfs.img" ); then dfatal "dracut: creation of $outfile failed" exit 1 else dinfo "*** Created microcode section ***" fi fi if ! ( umask 077 cd "$initdir" find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet | \ $compress >> "${DRACUT_TMPDIR}/initramfs.img"; ); then dfatal "dracut: creation of $outfile failed" exit 1 fi dinfo "*** Creating image file done ***" if (( maxloglvl >= 5 )) && (( verbosity_mod_l >= 0 )); then if [[ $allowlocal ]]; then "$dracutbasedir/lsinitrd.sh" "${DRACUT_TMPDIR}/initramfs.img" | ddebug else lsinitrd "${DRACUT_TMPDIR}/initramfs.img" | ddebug fi fi if cp --reflink=auto "${DRACUT_TMPDIR}/initramfs.img" "$outfile" |& derror ; then dinfo "*** Creating initramfs image file '$outfile' done ***" else rm -f -- "$outfile" dfatal "dracut: creation of $outfile failed" exit 1 fi if ! sync "$outfile" 2> /dev/null; then dinfo "dracut: sync operartion on newly created initramfs $outfile failed" exit 1 fi exit 0
💾 Save Changes
Cancel
📤 Upload File
×
Select File
Upload
Cancel
➕ Create New
×
Type
📄 File
📁 Folder
Name
Create
Cancel
✎ Rename Item
×
Current Name
New Name
Rename
Cancel
🔐 Change Permissions
×
Target File
Permission (e.g., 0755, 0644)
0755
0644
0777
Apply
Cancel